BOB Headquarters Blazer “Big Shot” Anti-Flare Butane Dab Torches

The Big Shot is one of the best torches on the market right now for dabs. It holds twice the amount of butane verse any other torch and has a fixed ignition sparker so the likely hood of your sparker dying is much lower. Add in the easy one hand functionality and you have yourself an amazing torch for instant heat to any dab nail!

The GT8000 has an anti-flare, brass frame nozzle, for safety and flame control. Its design is intended for a low blow-out rate, when held in various positions, or where access is difficult, or space is limited. Its head is angled and it comes with an attachable, tabletop base for hands-free work. It features a gas-flow adjustment dial to control flame length. The Blazer dab torch houses a piezoelectric ignition system, which is based on a pressurized molecular reaction, and requires no electrical connection.

Piezoelectric energy occurs when the trigger is activated, releasing a small, spring-loaded internal hammer that strikes a crystal, producing a spark and resulting in gas flame ignition.

With a maximum flame temperature of 2,500 degrees F, the GT8000 has a continuous burn time of approximately 35 minutes, at maximum fuel volume, and has a 35-gram gas capacity.

This Blazer torch has an angled head, and its flame range is 1.25 to 5.0 inches. It has a safety component that offers manual lock of the ignition, when not in use. It measures 7.5 (l) x 5.25 (w) x 2.0 (d) inches, weighs 12.0 ounces and has a black body finish.

Product features:
– Anti-flare, brass-frame nozzle, for safety and flame control
– Attachable tabletop base, for hands-free use
– About 7 inches tall
– Gas-flow adjustment dial, to control flame length
– Piezoelectric ignition system, requires no electrical connection
– 2,500-degree F, torch flame, for a more precise flame tip

HOW LONG DOES WARRANTY COVERAGE LAST

One year from original date of purchase (Original proof of purchase required). Warranty coverage ends when a products becomes unusable for reasons other than defects in workmanship or material.

HOW YOU CAN GET SERVICE 

Should a problem arise with your Blazer unit(s) please send it (post prepaid) to the address below. Be sure to include:

• Original dated receipt as Proof of Purchase
• A note explaining the problem(s)
• Your complete contact information including a phone number where you can be reached
• Return the unit(s) to 

NOTE: Please sure to include some method of tracking your return. Blazer Products is not responsible for items lost in transit. 

Warranteed products will be repaired or replaced, at Blazer Products’  discretion, and returned at no additional cost.

OUT OF WARRANTY SERVICE 
  
For products past the one year warranty date please follow the return directions above and

• Include $25.95 USD per non-warranty product 

Non-warranteed products will be repaired or replaced, at Blazer Products Inc’s discretion. 

WHAT IS NOT COVERED

Product failures due to misuse, abuse, or normal wear and tear are not covered by this warranty

PLEASE NOTE:
BE SURE TO EMPTY ALL ITEMS OF BUTANE GAS BEFORE RETURNING.  BE SURE TO INCLUDE SOME METHOD TO TRACK YOUR RETURN.

WARNING:
Never fill or empty any torch or lighter over a sink (or similar well) or surface depression. Butane gas is heavier than air and may collect in low spaces, and ignite if sparked. Always refill your Blazer torch in a well ventilated room and always allow gas to stabilize for 60 seconds before attempting to ignite.